Pansy Frenzy!

Hi, thanks for stopping by. I can’t get enough of the stamps, dies, and papers in the new Pansy Patch suite, and after the theater card I made (see last post), I made a few more cards to show various ways to use the set. First is a simple card, made from pretty papers and ink. I DID use a die to cut out the pansies, but you could certainly fussy cut them by hand. Start with an 8.5 x 5.5 inch piece of white cardstock, folded in half. I used polka-dot paper cut 5.5x 2.25 inches, glued a thin strip of dark (Blackberry Bliss) cardstock next to that (save those strips!), and stamped the sentiment. Then it was just a matter of placing the cut-out pansies on the card with dimensional foam. Done!

Next, I made a card using the pansy stamps, designer paper, and a scalloped oval and plain oval that I diecut. The base is the same size white cardstock as before, matted with the Blackberry Bliss which was cut to 4 and 1/8 by 5 and 3/8 inches. The designer paper is 4 by 5.25 inches, and went on next. I stamped the pansy using 4 layering stamps in three colors, and the sentiment, on the white oval. That was glued to the dark oval, and the whole piece was attached to the card with dimensional foam. Nice, yes?

Finally, I made a card with the dies, this time coloring the petals with my blending brushes and stamp pads. Each pansy had 8 pieces, and the leaves each had two. I again used a plain white card base, this time in landscape orientation, and glued a 5.5 by 5.25 piece of dark cardstock to the front. I then diecut a piece of white cardstock with the largest die from the Ornate Borders set- it reminds me of my grandma’s doilies! I used the blending brushes to make a yellow background (the same yellow is on the two upper petals), and applied deep pink to the lower petal. After all the flower pieces were assembled, I arranged them and before attaching them, I stamped my sentiment. Then, I glued down the leaves and the pansy on the right, and popped the left one up using dimensional foam. I was so pleased with the result!

I hope this gives you some ideas about how you can use this very versatile bundle. I’ll be using it for years to come! Take care, stop by again, and in the meanwhile-

Happy stamping!

Michelle

P.S. Feel free to contact me if you have questions about the instructions, the materials used, or for a catalog (if you live in the U.S. and don’t have a Stampin’ Up! demonstrator that you order from). Also, contact me about joining my team! To shop, click Visit My Site above. Thanks again!

Processing…
Success! You're on the list.
Product List

HO, HO, HURRICANE?

Well Hurricane Eta is off the west coast of Florida right now, huffing and puffing at us, headed north (be safe, everyone!). What am I doing? In the middle of the blowing winds, rain, tornado watches, flood warnings, and who knows what else, I’m making Christmas cards! There’s a first time for everything!

I just attended an online Stampin’Up! convention- so fun- and was inspired by all of the great demonstrations there to do a simple card, then dress it up a bit. Here is my attempt:

The card on the left couldn’t be simpler. I used a piece of 5 and 1/2 by 8 and 1/2 inch thick cardstock, folded in half for the base, and cut a piece of blue (Misty Moonlight) cardstock to 5 and 1/2 by 4 and 1/4 inches. I also cut a piece of blue cardstock to 4 by 1 and 1/4 inches, and a piece of white to 4 by 1 inches. To maximize my 12 x 12 inch “pretty paper”, I cut it like this:

First, I decided whether I wanted my pieces in portrait or landscape mode, since the pattern runs one way. I chose portrait, so I cut three 1/2 inch strips off the bottom. These reverse to a nice small print, and will be used to make banners for other cards. You are left with a large piece that measures 12 by 10 and 1/2 inches. This was cut in have from the short side, making two 12 by 5 and 1/4 pieces, and then each of these was cut into three pieces measuring 4 inches by 5 and 1/4. This is the perfect size for the front of an A2 card, leaving a small border all around.

For this card, I needed one inkpad (Real Red), and one stamp. This one is from the Tag Buffet set. I stamped the greeting on the white paper, and glued that to the small blue piece. After adhering the pretty paper to the large blue piece with margins as shown, I glued the greeting where I thought it covered the least important part of the picture, and was done. The next card requires a cutting and embossing machine, an embossing folder, and cutting dies. It had the same basic pieces, but I embossed the pretty paper with the Tasteful Textile embossing folder (it’s hard to see in the photo, but adds a nice touch). I used the Wreath Builder dies for the wreaths and poinsettias, layered them as shown, and popped them up on dimensional foam dots to attach them to the card after it was assembled.

I did cut two small pieces of yellow (Bumblebee) to back the poinsettias, and added three enamel dots to the greeting. What do you think? As always, thanks for dropping by. I love sharing my cards with you!

Happy stamping,

Michelle

P.S. If you love cardmaking or scrapbooking, and are thinking about how you could share that with others, contact me. I can tell you what I do, as well as the advantages of joining my team!

Processing…
Success! You're on the list.
Product List