From Halloween to Christmas!!!

A friend asked if I could make some Christmas tags, so these are my first of the season. I like using punches for tags, because they’re so quick to make. The tree punch used here is retired, but SU has a really cute tree punch in the current catalog, the Pine Tree punch.

I cut white thick cardstock into 4.25 x 2 inch pieces, used the Delightful Tag Topper punch for the scalloped end. I glued a 2×2 inch piece of designer paper to the other end, and rounded those corners with the Detailed Trio punch. I cut thin strips of Glimmer Paper and green cardstock, ran a thin bead of glue along the top of the designer paper, and glued them down, trimming excess from the sides with scissors. I punch the tree from Glimmer Paper and popped it up with dimensional foam. I stamped a sentiment on a thin strip of white, and cut a cardstock mat slightly wider. After gluing that and trimming it, I folded a piece of ribbon in half, pushed the folded edge through the hole from front to back, and drew the cut ends up through the loop.

Tags make nice gifts for coworkers with a roll of coordinating wrapping paper. Give it a try!

Thanks for stopping by. If you need supplies, click the Visit My Site button.

Happy stamping!


Stamps, Ink, and Paper (#SIP)

Hello, and welcome! I’ve had a pretty uneventful week, considering the times we live in, so that’s a good thing! I did get a chance to use a new stamp set called Beautiful Friendship- I think it is one I’ll reach for often. I had seen some other cardmakers using large-ish floral stamps to make two or four cards at once. I thought I would start with two, and see how it went. Well, here are the two cards:

I started with a piece of Whisper White paper, 8 x 5.25 inches, the stamp set above, and four ink pads- Poppy Parade, So Saffron, Highland Heather, and Mossy Meadow. First, I stamped the double rose image, then the large yellow flower, and filled in with the leaves and purple flowers. I did snip a mask of just the tips of the leaves because I decided the one card needed one more flower, the small rose. I didn’t really have a plan, just went with the flow. When I was satisfied with the result, I cut the piece of white cardstock into two 4 x 5.25 inch pieces, stamped the sentiments, mounted each on a 4.25 x 5.25 inch piece of Poppy Parade cardstock, and attached those to white card bases.

With the cards side by side, you can see that they were stamped together.

Any stamp set with multiple floral images would do. This set also has a few lovely sentiments. I hope you’ll give this “technique” a try. It was a quick and fun way to make two cards at once, AND it required nothing more than stamps, ink, and paper (ok, also glue!). I would love to see pictures of your version. The supplies for these cards are listed below, and are available through my shop. Thanks for looking!

Happy stamping,


Success! You're on the list.

Cards for beginning cardmakers

Hello! Last time I talked about using designer papers to make quick cards, but as I was doing that, I thought that it is also a good way for beginning cardmakers to make pretty cards with few tools and stamps. The new year Stampin’ Up! catalog year starts June 4th, and while we have a great selection of new papers to look forward to using, those from the current catalog will not continue.

I wanted to make some more cards that leaned heavily on the designer paper, and only used a sentiment stamp. For this card, I used the Bird Ballad designer paper.

This card was made with two pieces of a reversible designer paper, adhered to white cardstock with a thin margin. Tip: the ribbon was actually two pieces, about 5 and 6 inches. The shorter was knotted around the longer, which was adhered to the back of the white card. The sentiment was stamped on coordinating cardstock, trimmed with scissors and glued down.

For this card, I cut a piece of the reversible designer paper into 4 by 5.25 inches, then cut that into two pieces that were 2 by 2 and 7/8 inches, and two that were 2 by 2 and 3/8 inches. I adhered the pieces with glue, starting with the pieces on the left, trying to keep margins even. I finished it with some coordinating ribbon and a sentiment which was punched with a 2-inch circle, and backed by card punched with the Starburst punch- I’m sad that it’s also being discontinued- I love this punch! The sentiment “stack” was raised with foam dimensional dots.

The next card used the paper from the Dressed to Impress suite. So girly!

This time I didn’t leave any margins- I cut all strips 5.5 inches wide, the floral strips are 1 inch and 1.25 inches, and the green is 2 inches high. They were butted against one another, and the sentiment is on white cardstock that was cut with a die, but could easily have been trimmed to a rectangle. I was tempted to add some other embellishments, but I resisted! The sentiment (stamped in the gorgeous Lovely Lipstick color, which is being retired) was again raised with dimensional dots. It isn’t necessary if you don’t have them, but gives a nice dimension to the card.

I hope you enjoy the cards, and as always, if you need supplies or want to browse, click the button above to visit my store. As mentioned, the designer papers some ink colors (the five 2018-2020 InColors), the Starburst punch, and many other items will be discontinued as of June 3rd, and are offered now while supplies last, so if you’ve had your eye on something, don’t wait. I had to stock up on a couple of my favorites! Thanks for stopping by, and happy stamping,


Success! You're on the list.